Products Description
Equipment Parameters
| Specification | Value |
|---|---|
| Model | YNJQ-300 |
| Bore Diameter | Φ 310mm |
| Centre Height | 1342mm (Customizable, available for larger or smaller sizes) |
| Application | 60mm - 280mm (2-3/8" to 11") |
| Speed Range | Air-cooled hydraulic power, manual stepless speed control; Rotating head speed: 0.5-5.5r/min (Optional for Max. 10.5r/min) |
Make-up/Break-out Torque | Max. make-up/break-out torque: 73,756 ft.lb (100 kN.m) @ 20MPa pressure |
| Application Scenarios | Make-up, break-out or verify connection integrity of high-torque threaded connections in tubulars (oil tubings, casing pipes, etc.), downhole tools/bottomhole assemblies including drilling tools and accessories (drill pipe, drill collar, drill bit, stabilizer, dowhole motors, etc.), completion tools and accessories (nipples, packer, tubing hanger, etc.), wellhead, fittings, and more. |
| Torque Display | The computer can display, record and control the torque and turns. |
| Control Mode | Simens S7-1200 PLC + 15" all-in-one computer, operation with buttons; The machine will stop automatically reaching the setting torque. |
| Torque Accuracy | 150 ft.lb |
| Dies Marking | According to API standards, no damage to pipe accuracy; Optional no-marking dies (Fe-free for special materials like chrome, and no marking on pipe surface). |
| Motor Power | 30kW (Customizable), ABB Frequency converter control |
| Hydraulic System | Max. pressure: 20MPa; Flow rate: 50-240L/min |
| Dimensions | Main machine: 3m × 1.9m × 2.22m (Customizable, available for larger or smaller sizes) |
| Total Weight | 13T |
| Power Tong | 360° full rotation |
| Connections | API (Round & BTC) and Premium connections (TS3SB, VAM, BDS, SEC, AB, ANTARES, T Blue, etc.) |
| Turns Accuracy | Resolution: 1/1000 |
Torque Control Accuracy | Torque ≤ 3120N.m: ±5%; 3120N.m ≤ Torque ≤ 7800N.m: ±156N.m; Torque ≥ 7800N.m: ±2% |
| Qty. of Cylinders | 5 clamping cylinders for each power tong and backup tong |
Eccentricity Range (Optional) | 0-200mm (Horizontal Offset) |
| Push/Pull (Optional) | Max. force: 15T-30T |
Note: The conversion for 100 kN.m to ft.lb is approximately 73,756 ft.lb.
I. Structures and Features
The YNJQ300 hydraulic bucking machine (also called as hydraulic makeup and breakout unit) is equipped with 5 hydraulic cylinders. During operation, the pipe remains fixed while the 5 cylinders work in sync to clamp the coupling and rotate continuously. Each cylinder controls one jaw, and the reliable synchronizer is imported from Italy. The backup tong can float slightly to automatically adjust its center. The clamping force is controlled by the hydraulic system.
This design offers several key advantages: broad application range, high mechanical strength, reliable clamping with no slippage, minimal pipe damage, small die marking in accordance with API standards, and high automation. Additionally, the machine features automatic speed regulation via a frequency converter, making it suitable for premium connections.
Main Parts of YNJQ300 Fully Rotational Bucking Machine:
Power Tong Assembly
Backup Tong Assembly
Electrical-hydraulic Control System
Control System (PLC + Upper Computer)
Key Parts Images
Control Cabinet and Torque-turn Curve of Bucking Unit
Non-marks Dies
II. Scope of Supply
| No. | Name | Qty. (set/pcs) | Remarks |
|---|---|---|---|
| 1 | Bucking machine | 1 set | Includes power tong assembly, backup tong assembly, basement, and two moving supports. |
| 2 | Hydraulic unit | 1 set | Includes hydraulic pump, valves, integrated package, oil tank, motor, fan cooler, and pipeline. |
| 3 | Control cabinet | 1 set | Includes control panel, computer, and control box. |
| 4 | Dies | 10 pcs | — |
| 5 | Micro-dies | 10 pcs | — |
| 6 | Documents | 1 set | Includes QC certificate, warranty certificate, operation & maintenance manual, installation drawing, and e-drawing. |
III. Reference Images of YNJQ300 Bucking Unit
1. YNJQ300 Bucking Unit Exported to France
2. Standard YNJQ300 Bucking Unit
3. Non-marking Bucking Machine
A non-marking bucking machine prevents damage to the anti-corrosion coating and minimizes impact on the outer surface of the pipe. This kind of machine is popularly used in threading electroplated tubing includes special anti-corrosion materials such as galvanized coatings and tungsten alloy coatings for oil and casing pipes.
Die Mark Showcase
4. YNJQ300 Bucking Unit with Large Torque of 205kN.m (150,000ft.lbs)
5. YNJQ300 Bucking Unit with Push/Pull
6. YNJQ300 Bucking Unit Exported to Russia
Hot Tags:
