Products Description
Equipment Parameters
| Specification | Value |
|---|---|
| Model | YNJG-570 (YNJG570/68, YNJG570/80) |
| Bore Diameter | Φ 570m (~Φ 22-1/2'') |
| Centre Height | 1200mm |
| Application | O.D. 245-508mm (Φ 9-5/8″ to 20'') |
| Speed Range | Rotation speed: Low gear 1-7r/min, High gear 1-21r/min (YNJG570/68); 1-10r/min (YNJG570/80) |
| Make-up/Break-out Torque | Max. make-up/break-out torque: 50,154 ft-lb (68kN.m, YNJG570/68); 59,005ft-lb (80kN.m, YNJG570/80 customizable for higher torque) |
| Application Scenarios | Mainly used in production and repair lines for tubular products such as casing and tubing, etc. |
| Torque Display | The computer can display, record and control the torque and turns |
| Control Mode | Simens S7-1200 PLC + 15" all-in-one computer, operation with buttons; The machine will stop automatically reaching the setting torque |
| Torque Accuracy | 150 ft.lb |
| Dies Marking | According to API standards, no damage to pipe accuracy; Optional no-marking dies (Fe-free for special materials like chrome, and no marking on pipe surface) |
| Motor Power | 30kW (Customizable), ABB Frequency converter control |
| Hydraulic System | Max. pressure: 20MPa; Flow rate: 40-180L/min |
| Dimensions | Main machine: 3.7m × 1.55m × 1.95m (Customizable, available for larger or smaller sizes) |
| Total Weight | Approx. 8.8T (Customizable) |
| Operation | Auto/Manual |
| Connections | API (Round & BTC) and Premium connections (TS3SB, VAM, BDS, SEC, AB, ANTARES, T Blue, etc.) |
| Steel Grade of Pipes | H40，J55，K55，N80，L80，C90，L95，P110，Q125 |
| Turns Measurement Resolution | 1/1000 |
| Torque Control Accuracy | Torque ≤ 3120N.m: ±5%; 3120N.m ≤ Torque ≤ 7800N.m: ±156N.m; Torque ≥ 7800N.m: ±2% |
| Air Pressure | 0.4-0.8MPa (Provided by user) |
| Production Speed | For pipe ≤ 20'', 3-4 threads remained, 20-30 pieces/hour |
| Load Table (Optional) | Also called as auxiliary machine, handling system or transmission line to feed pipes |
Note: The conversion for 68 kN.m to ft.lb is approximately 50,154 ft.lb.
I. Structures and Features
Model YNJG570 bucking machine is a special-purpose equipment used to make up and breakout the coupling and pipe (oil tubing, casing pipe, etc.).
The power tong assembly is responsible for initiating rotation and making up (or breaking out) the coupling, while the backup tong assembly is used to clamp the pipe body. The power tong is driven by a hydraulic motor, and the clamping and shifting of the backup tong are powered by pneumatic cylinders. The make-up/break-out torque is measured by a load sensor located at the lower end of the backup tong and is displayed on the computer at the operation console, with automatic control managed by the PLC system. This machine can finish the work of 9-5/8"-20" diameter casing and tubing, the jaw plates include 9-5/8'', 10-3/4'', 13-5/8'', 16'', 18-5/8'', 20'', other sizes need to be purchased separately.
The Structure Features
1) Driven and controlled by hydraulic and pneumatic system, and easy and convenient to operate.
2) Controlled by pneumatic, except for the power tong which driven by hydraulic motor, it can greatly reduce the oil leakage.
3) The power tong uses closed structure, it is driven by hydraulic motor, the clamp head has 4 jaw plates with 90º distributing, every jaw plate has 4-6 dies, totally 16-24 dies contacting the coupling surface, the die marks are according to API standard, the clamp head can reset automatically.
4) The power tong and backup tong can regulate their center in one line automatically to meet the requirements of using.
5) Backup tong is similar to the power tong, but it is driven by the pneumatic cylinder.
6) The backup tong is equipped with load sensor used to measure torque (unit:ft-lb or N.m). The control system will contrast the torque value and screw turns with the set value, control the working automatically.
7) Easy to change dies.
This design offers several key advantages: high and low gear rotating, efficient operation, simple controls, and stable performance. It allows for quick die replacement, with a design that ensures reliable clamping and API-compliant die marks. An automatic positioning mechanism enables fast and accurate tong head reset after bucking. Additionally, the power tong and backup tong can automatically center, accommodating slightly bent tubing, casing, and couplings.
Main Parts of YNJG570 Bucking Machine
Power Tong Assembly
Backup Tong Assembly
Electrical-hydraulic Control System
Control System (PLC + Upper Computer)
Frame Base
Pneumatic System
Key Parts Images
Control Cabinet and Torque-turn Curve of Bucking Unit
Non-marks Dies
II. Scope of Supply
| No. | Name | Qty. (set/pcs) | Remarks |
|---|---|---|---|
| 1 | Bucking machine | 1 set | Includes power tong assembly, backup tong assembly, basement, and two moving supports. |
| 2 | Hydraulic unit | 1 set | Includes hydraulic pump, valves, integrated package, oil tank, motor, fan cooler, and pipeline. |
| 3 | Control cabinet | 1 set | Includes control panel, computer, and control box. |
| 4 | Dies | 1 set | Material: 20CrMnTi |
| 5 | Jaw Plate | 1 set | According to technical agreement |
| 6 | Documents | 1 set | Includes QC certificate, warranty certificate, operation & maintenance manual, installation drawing, and e-drawing. |
III. Reference Images of YNJG570 Bucking Unit
1. Standard YNJQ570/68 Bucking Unit
2. YNJG570/68 Bucking Machine Image Set 1
3. YNJG570/68 Bucking Unit Image Set 2
4. YNJG570/68 Bucking Unit Image Set 3
5. Standard YNJG570/80 Bucking Unit
6. YNJG570/80 Bucking Unit with Loading Table
7. YNJG570/80 Bucking Unit Image Set
Hot Tags:
